EasyManuals Logo

ResMed Power Station II Quick Start Guide

ResMed Power Station II
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
ResMed Power Station II (RPS II)
External battery pack for ResMed ventilators and sleep devices
(24V and 26V)
Long-lasting power—doubled
• RPS II provides extended hours of run
time with a single battery.
• The power capacity and operation time
can be doubled by using two batteries,
with an automatic transition from the
primary battery to the reserve.
Convenient and portable
• RPS II provides battery power for the
device in case of power outages or
where mains power is not available.
• RPS II is suitable for both home care
and hospital care.
• It is ideal for travel or when additional
mobility and freedom are required such
as on the back of a wheelchair.
Safety alerts and indicators
• Audibleandvisualalerts—abeeping
sound and orange light (LED) indicate
that the battery needs to be recharged.
• Thebattery-chargedisplayindicates
the charge level.
This all-in-one pack provides convenient power and backup power for ResMed
ventilators and sleep therapy devices, without the need for a separate converter.
ResMed Power Station II—convenient and portable
external battery pack for ResMed therapy devices
RPS II in its own convenient carry bag

Other manuals for ResMed Power Station II

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ResMed Power Station II and is the answer not in the manual?

ResMed Power Station II Specifications

General IconGeneral
Charge TimeApproximately 4 hours
Battery TypeLithium Ion
Weight0.9 kg
Operating Temperature5°C to 35°C
Storage Temperature-4°F to +140°F (-20°C to +60°C)
Expected Battery LifeApproximately 500 full discharge cycles
Output Voltage24V DC