To Next PageTo Next Page
Need help?Do you have a question about the ResMed S8 AutoSet Spirit and is the answer not in the manual?
General| Pressure Range | 4-20 cm H2O |
|---|---|
| Ramp | Yes |
| Altitude Adjustment | Automatic |
| Leak Compensation | Yes |
| Type | CPAP |
| Modes of Operation | AutoSet, CPAP |
| Weight | 2.2 lbs |
| Power Supply | 100-240V AC |
| Humidifier | Optional |
Indicates the system is for treating obstructive sleep apnoea (OSA) in adult patients.
Lists pre-existing conditions where positive airway pressure therapy may be contraindicated.
Use only ResMed approved data port products and masks for safe operation.
Precautions for using oxygen with the device, including turning off flow and avoiding flames.
Do not open the device, use only approved parts, and ensure proper airflow.
Step-by-step instructions for setting up the S8 AutoSet Spirit device.
Steps to begin therapy, including powering on and fitting the mask.
Explains the SmartStart feature for automatic start/stop based on breathing.
Guide to using the mask-fitting feature for optimal mask seal.
Instructions on how to attach the HumidAire 3i humidifier to the S8.
Details the functions of each key on the S8 AutoSet Spirit keypad.
How to enter, scroll, and exit menu screens and options.
Electrical shock warning regarding immersion in water and unplugging before cleaning.
Warnings about air filter use and cautions against opening the device for servicing.
Warning against connecting to both AC and DC power sources simultaneously.
Solutions for mask fit issues and SmartStart functionality problems.
Instructions for addressing high leak alerts by adjusting the mask.
Troubleshooting for 'Card Error' and other issues during Data Card operations.
