To Next PageTo Next Page
Need help?Do you have a question about the ResMed AutoSet and is the answer not in the manual?
Details the main components included in the S9 system.
Provides advice for transporting the H5i humidifier.
Details on how to use the H5i's warm-up feature to pre-heat the water.
Procedure for checking and adjusting mask seal using the mask-fit function.
Specific steps for daily cleaning of the air tubing and water tub.
Instructions on how to replace the air filter on the S9 device.
Step-by-step instructions for safely removing the SD card.
Details the main components included in the S9 system.
Provides advice for transporting the H5i humidifier.
Details on how to use the H5i's warm-up feature to pre-heat the water.
Procedure for checking and adjusting mask seal using the mask-fit function.
Specific steps for daily cleaning of the air tubing and water tub.
Instructions on how to replace the air filter on the S9 device.
Step-by-step instructions for safely removing the SD card.
General| Device Type | CPAP Machine |
|---|---|
| Pressure Range | 4-20 cm H2O |
| Ramp | Yes |
| Data Storage | SD card |
| Mask Fit Check | Yes |
| Therapy Modes | CPAP, AutoSet |
| Ramp Time | 0-45 minutes |
| Power Supply | 100-240V, 50-60Hz |
| Operating Altitude | Up to 8, 500 feet (2, 591 m) |
| Humidifier | Optional, integrated heated humidifier |
| Data Recording | Detailed data recording including AHI, leak |
| Weight | 1.06 kg (without humidifier) |
| EPR (Expiratory Pressure Relief) | Yes, levels 1-3 |
