To Next PageTo Next Page
Need help?Do you have a question about the ResMed S8 AutoSet Spirit II and is the answer not in the manual?
General| Brand | ResMed |
|---|---|
| Model | S8 AutoSet Spirit II |
| Category | Medical Equipment |
| Language | English |
User and owner of the system have sole responsibility for injury or damage resulting from improper use or modifications.
Specifies the intended use of the S8 AutoSet Spirit II system for treating obstructive sleep apnoea in adults.
Lists conditions where positive airway pressure therapy may be contraindicated for certain patients.
Provides critical safety warnings regarding manual reading, physician advice, and device connections.
Offers precautions for safe and effective use, including rebreathing at low pressures and temperature effects.
Lists potential side effects patients may experience during therapy with the S8 device.
Details the main components of the S8 AutoSet Spirit II device as shown in the illustration sheet.
Lists the ResMed mask systems recommended for use with the S8 AutoSet Spirit II.
Explains compatibility with the HumidAire 3i integrated heated humidifier.
Describes ResScan Data Card modules and adapters for data transfer.
Lists other accessories that may be purchased separately for the system.
Explains the system's design for clinical and home treatment of OSA, including CPAP and AutoSet modes.
Details fixed-pressure therapy, ramp settings, and Expiratory Pressure Relief (EPR) in CPAP mode.
Describes how the device self-adjusts pressure based on inspiratory flow limitation, snore, and apnoea.
Explains EPR feature for easier exhalation, its levels, and usage options.
Instructions for placing the device, connecting power cords, and attaching air tubing.
Explains how SmartStart automatically starts/stops therapy based on patient breathing.
Guides on how to initiate therapy using SmartStart or the Start/Stop key.
Details methods for stopping therapy, either manually or automatically via SmartStart.
Describes the mask-fit feature for optimizing mask seal and minimizing leaks before therapy.
Identifies the keypad buttons and LCD screen used for menu navigation and operation.
Explains how patients can navigate standard or detailed menus to view settings and data.
Details how to access and navigate the clinical menu for advanced settings and data review.
Describes how to set and manage Expiratory Pressure Relief (EPR) settings.
Explains how to access and interpret efficacy and usage data from the clinical menu.
Guides on understanding pressure, leak, AHI, AI, and HI data for therapy assessment.
Details the Smart Data feature for patient review of therapy metrics like mask fit and pressure.
Instructions for attaching and removing the blank module to access the data communications port.
Explains how to use the Data Card module for collecting and updating patient data.
Covers labeling, supplying, and returning Data Cards for patient data management.
Provides instructions for copying and updating data using the Data Card.
Guidance on transferring and analyzing data using PC applications.
Details serial and USB adapters for connecting the device to a PC.
Instructions for connecting and disconnecting serial or USB adapters to the device.
Outlines daily cleaning steps for the mask, air tubing, and humidifier.
Details weekly cleaning steps for the air tubing and mask system.
Covers periodic cleaning of the device exterior and checking the air filter.
Step-by-step guide on how to remove and replace the air filter.
Information on professional servicing, repair, and the expected service life of the device.
Answers if patients can use the S8 AutoSet Spirit II with a humidifier.
Explains the purpose and settings of EPR for patient comfort during exhalation.
Details methods for accessing patient data via LCD, Data Card, or PC connection.
Clarifies how long the Data Card needs to be in the device to collect data.
Addresses using the device internationally and on aircraft.
Explains how to power the device using a DC input when AC power is unavailable.
Addresses issues like 'No display' and 'Treatment pressure seems low' with causes and solutions.
Troubleshoots issues with SmartStart not starting or stopping, and device errors.
Solutions for pressure issues and error messages related to masks and leaks.
Addresses errors related to Data Card insertion, data retrieval, and settings updates.
Provides key performance metrics, physical dimensions, and weight of the S8 AutoSet Spirit II.
Details input power ranges, consumption values, and power outlet specifications.
Specifies the measured sound pressure level and uncertainty for the device.
Lists dimensions for Data Card, Data Card Module, and Adapters.
Outlines operating temperature, humidity, and electromagnetic compatibility requirements.
Explains symbols on the device and proper disposal of electronic equipment.
