To Next PageTo Next Page
Need help?Do you have a question about the ResMed AutoSet S9 Series and is the answer not in the manual?
General| Device Type | CPAP Machine |
|---|---|
| Pressure Range | 4-20 cm H2O |
| Data Storage | SD card |
| Sound Level | 24 dBA |
| Modes of Operation | CPAP, AutoSet |
| Power Supply | 100-240V, 50/60Hz |
| Automatic Altitude Adjustment | Automatic |
| Humidification | Optional integrated heated humidifier |
| Weight | 1.8 lbs (without humidifier) |
| EPR | Expiratory Pressure Relief (EPR) with three comfort settings |
Solutions for issues where the device display is not active, like power connection problems.
Addresses causes and solutions for low air delivery, such as ramp time or dirty filters.
Solutions for SmartStart/Stop not triggering or stopping automatically.
Explains causes for unexpected pressure increases, like talking or mask cushion issues.
Solutions for a high temperature error message, including cooling and restarting.
Addresses errors related to the power supply unit and its connection.
Solutions for 'Tube blocked' and 'High leak' error messages.
Solutions for errors related to the SD card, such as incorrect insertion.
Precautions against electrocution, immersion in water, and handling of power cords.
Warnings about flammable anesthetics, mask usage, and vent hole blocking.
Guidance on using oxygen with the device, including combustion risks.
Warnings about opening the enclosure, cleaning solutions, and setup accuracy.
