To Next PageTo Next Page
Need help?Do you have a question about the ResMed S9 Escape and is the answer not in the manual?
General| Device Type | CPAP |
|---|---|
| Therapy Modes | CPAP |
| Pressure Range | 4 to 20 cm H2O |
| Data Storage | SD card |
| Sound Level | 26 dBA |
| Power Supply | 100-240V AC, 50/60Hz |
| Humidifier | Optional |
| Ramp | Yes |
| Operating Altitude | Up to 2, 500 m |
| Display | LCD |
| Data Recording | Usage hours |
Lists conditions where therapy is contraindicated and potential side effects.
Identifies situations where the H5i humidifier should not be used.
Describes CPAP, AutoSet, and APAP modes and their functionalities.
Explains Expiratory Pressure Relief (EPR) technology and its usage checklist.
Explains how the AutoSet algorithm adjusts pressure based on inspiratory flow, snore, and apnea.
Describes obstructive apnea and how the device responds to it.
Introduces Climate Control for constant humidity and temperature, protecting against rainout.
Details the types of data stored on the SD card and device, and their availability.
Step-by-step instructions for connecting the H5i, power supply, and tubing.
Guidance on mask selection and compatibility with S9 tubing types.
Automatic humidity delivery with rainout protection.
Manual adjustment of humidity and temperature without rainout protection.
Instructions on how to start, stop, and manage therapy delivery, including SmartStart.
How to use ResMed PC application to analyze data from the SD card.
Step-by-step guide for replacing the air filter in the S9 device.
Essential safety precautions and warnings for device operation and handling.
Specific warnings and cautions related to the S9 device, accessories, and usage.
Cautions regarding placement, cleaning, and airflow for the S9 device.
Warnings specific to the H5i humidifier and air tubing, including handling and usage.
