To Next PageTo Next Page
Need help?Do you have a question about the ResMed S9 AutoSet and is the answer not in the manual?
General| Device Type | CPAP Machine |
|---|---|
| Pressure Range | 4-20 cm H2O |
| Sound Level | 24 dBA |
| Data Storage | SD card |
| Automatic Altitude Adjustment | Yes |
| Leak Compensation | Yes |
| Mode of Operation | CPAP, APAP |
| Ramp Time | 0 to 45 minutes |
| Power Supply | 100–240V AC, 50–60Hz |
| Weight | 835 grams |
| Dimensions | 153 mm x 140 mm x 86 mm |
Connect the power supply, air tubing, and mask system to the S9 device.
Details the functions of the Start/Stop button, Home menu, LCD screen, Info menu, Setup menu, and Push dial.
Explains how to navigate menus using the dial and selection buttons.
Steps to begin therapy, including power connection, ramp time, mask fitting, and starting the device.
Daily, weekly, and monthly cleaning procedures for the air tubing and device exterior.
Instructions on how to remove, discard, and replace the air filter.
Solutions for problems like 'No display' and 'Insufficient air delivered'.
Resolving issues with the device not starting or stopping automatically.
Addressing pressure issues, buzzing masks, and high temperature error messages.
Solutions for blocked tubes, humidifier issues, power supply, and leak detection.
Guidance for resolving 'Card error' or 'Settings not updated' messages.
Detailed specifications including pressure range, noise levels, dimensions, and power supply units.
Details on operating temperature, humidity, altitude, and air filter types.
Information on EMC compliance, aircraft safety, and device classification.
Explanation of device symbols and WEEE directive for electronic waste disposal.
Guidelines for device inspection and servicing by authorized centers.
Details warranty periods for different product components and exclusions.
Critical safety instructions for device operation, maintenance, and handling.
Precautions regarding device placement, cleaning, air tubing, and breathing airflow.
