To Next PageTo Next Page
Need help?Do you have a question about the ResMed S9 VPAP Series and is the answer not in the manual?
General| Therapy Modes | CPAP, S, T, S/T |
|---|---|
| Data Storage | SD card |
| Power Supply | 100-240V AC, 50/60Hz |
| Humidifier | Optional H5i heated humidifier |
| Operating Altitude | Up to 8, 500 feet (2, 600 meters) |
Details on when to use VPAP devices and conditions where they are contraindicated.
Potential side effects patients may experience during VPAP therapy.
Details on when to use the H5i humidifier and conditions where it is contraindicated.
Advice for patients travelling with the VPAP system, covering tubing and power requirements.
Instructions for moving or travelling with the H5i, focusing on emptying the water tub.
Explains IPAP, EPAP, pressure support and available therapy modes (CPAP, S, ST, T, VAuto).
Details VAuto features and Expiratory Pressure Relief (EPR) settings for comfort.
Covers triggering, cycling, leak compensation (Vsync), and rise time adjustment for breath synchronization.
Explains TiControl parameters (Ti Max, Ti Min) for synchronizing breath delivery and patient effort.
How to set Min EPAP, Max IPAP, and pressure support in VAuto mode for therapy adjustment.
How Climate Control manages humidity and temperature for patient comfort and rainout prevention.
Covers CSA detection, Sleep Quality indicator, and ramp function for therapy.
Step-by-step guide for physically connecting the VPAP and H5i devices.
Guidance on selecting appropriate masks and compatible tubing for the VPAP.
Instructions for filling the H5i humidifier water tub with distilled or deionized water.
Overview of the Start/Stop button, Push Dial, LCD screen, and menu navigation.
Steps for navigating menus and understanding the Home screen display.
How to adjust Ramp, Humidity Level, Climate Control, and use Mask-fit from the Home menu.
Explains different treatment screens showing humidity, oximetry, and breath parameters.
Details parameters displayed during therapy, their units, and availability across modes.
Options for patients and clinicians to adjust therapy settings, comfort, and accessories.
Detailed breakdown of adjustable parameters within the Clinical Setup menu.
Covers options like Climate Control, Sleep Quality, SmartStart, Leak Alert, and reminder settings.
Device settings for language, factory defaults, data erasure, and units.
How to set up reminders and access Standard Info menu data (sleep quality, reports, service).
Explains Advanced and Clinical Info menus for detailed settings and reports, plus parameter descriptions.
Explains parameters for sleep reports and service data (run hours, software versions).
Compares Climate Control Auto and Manual modes for humidity and temperature management.
Steps for connecting power, fitting mask, starting, and stopping therapy.
Compatibility and considerations for using supplemental oxygen with VPAP devices.
Instructions for SD card operations and analyzing captured therapy data.
Information on data storage amounts, sampling rates, and data transmission adapters.
Procedures for routine cleaning of the VPAP and H5i.
Guidance on replacing the air filter and a general maintenance checklist.
Covers power, environmental, EMC, aircraft use, and VPAP device technical details.
Technical details for H5i, air tubing, and humidifier performance data.
Diagram of pneumatic flow path, maximum flow rates, and displayed value accuracy.
Important general safety guidelines and specific warnings for device usage and operation.
Precautions for device placement, cleaning, and specific warnings for humidifier and tubing.
