Need help?Do you have a question about the ResMed stellar series and is the answer not in the manual?
Information on battery capacity degradation, testing, and maintenance recommendations.
Steps for connecting the device and accessories for noninvasive ventilation.
Procedures for setting up the Stellar for invasive ventilation using specific accessories.
Step-by-step guide to perform a functional test before starting therapy.
Instructions for fitting the patient interface and starting treatment using the device.
Procedure for stopping therapy, including notes on SmartStop and oxygen usage.
Information on device alarms, their types, and how they alert the user to changes in treatment.
Instructions for navigating the Setup menu, including Clinical Settings, Alarm Settings, and Options.
How to use the USB port for storing and retrieving therapy and device data.
Common reasons for alarms and actions to resolve them, including checking assembly and connections.
Essential safety warnings and precautions for the proper and safe use of the Stellar device.
Information on battery capacity degradation, testing, and maintenance recommendations.
Steps for connecting the device and accessories for noninvasive ventilation.
Procedures for setting up the Stellar for invasive ventilation using specific accessories.
Step-by-step guide to perform a functional test before starting therapy.
Instructions for fitting the patient interface and starting treatment using the device.
Procedure for stopping therapy, including notes on SmartStop and oxygen usage.
Information on device alarms, their types, and how they alert the user to changes in treatment.
Instructions for navigating the Setup menu, including Clinical Settings, Alarm Settings, and Options.
How to use the USB port for storing and retrieving therapy and device data.
Common reasons for alarms and actions to resolve them, including checking assembly and connections.
Essential safety warnings and precautions for the proper and safe use of the Stellar device.
General| Data Storage | SD card |
|---|---|
| Device Type | Ventilator |
| Modes of Ventilation | CPAP, S, S/T, T |
| Power Supply | AC 100-240V, 50/60Hz |
| Operating Temperature | 5°C to 40°C |
| Operating Humidity | 10% to 95% (non-condensing) |
| Operating Altitude | Up to 2500 meters |
| Sound Level | 30 dBA |
| Humidification | Integrated heated humidifier |
| Connectivity | Wi-Fi |
To Next Page
