Need help?Do you have a question about the ResMed S8 Escape and is the answer not in the manual?
General| Pressure Range | 4 to 20 cm H2O |
|---|---|
| Ramp Function | Yes |
| Power Supply | 100-240V AC, 50/60Hz |
| Noise Level | 26 dBA |
| Therapy Modes | CPAP |
| Device Type | CPAP |
| Weight | 2.2 lbs |
| Operating Temperature | 41-95°F (5-35°C) |
| Operating Humidity | 10% to 95% non-condensing |
| Altitude | Up to 8, 500 ft (2, 600 m) |
| Data Storage | Basic compliance data |
| Sound Level | <30 dBA |
| Humidifier Compatibility | Compatible with ResMed humidifiers |
| Data Recording | compliance data |
Outlines the user's responsibility and liability for any injury or property damage resulting from system use.
Lists conditions where the device should not be used and critical warnings for safe operation.
Highlights important cautions for safe use and potential side effects patients may experience.
Step-by-step guide on setting up the S8 Escape device for operation.
Instructions for assembling the mask system and connecting it to the device.
Procedures for initiating and ending a therapy session with the S8 Escape.
Guide to modifying the ramp time setting for therapy.
Instructions for setting altitude compensation based on user location.
Steps to select a different language for the device interface.
Information on professional servicing, repairs, and scheduled inspections for the S8 Escape.
Solutions for problems related to the device display and power connection.
Troubleshooting steps for insufficient or excessive air delivery.
Explains common error messages displayed on the LCD and their meanings.
Troubleshooting steps for errors encountered with the Data Card module.
Outlines the warranty periods for ResMed products and what is covered.
Instructions on how to make a warranty claim and return a defective product.
To Next Page