ResortLOCK LockState RL4000 User Manual

www.ResortLock.com
Failure to follow the exact procedure can result in
erratic lock behavior.
General Information
 Reset lock: press and hold reset button (below the batteries holder)
for 10 seconds, red LED flash and beeps three times.
 Default master code: 123456
Tips for a new setup
1. Change master code (Default 123456)
2. Set lock time
3. Enable auto lock /auto unlock function and set function
time (if needed)
4. Add users
How to use the code/iButton
1. code: Enter code, #
2. iButton: Touch iButton reader
3. User iButton+code: Touch iButton reader, code, #
4. One time service code: Enter ∗, code, #
Set New or Change Master Code (and not delete existing user code)
#
current or default mc # 11 # 1-9 digits new mc # 1-9 digits new mc #
Change Master Code (and delete all user code)
#
current or default mc # 22 # 1-9 digits new mc # 1-9 digits new mc #
1. Set date / time
#
mc # 88 # yymmddhhmm #
2. Enter one or more user code with no restriction (for multiple code, repeat highlight part)
#
mc # 01 # 1-9 digits user code # # #
3. Enter one or more iButton key with no restriction (for multiple code, repeat highlight part)
#
mc # 01 # iButton key # #
4. Enter one or more iButton key + user Code with no restriction (for multiple code, repeat highlight part)
#
mc # 01 # 1-9 digits user code # iButton key # #
5. Enter one or more user code with time restriction (for multiple code, repeat highlight part)
(beginning time) (ending time)
#
mc # 01 # 1-9 digits user code # yymmddhhmm # yymmddhhmm #
6. Enter one or more iButton key with time restriction (for multiple code, repeat highlight part)
(beginning time) (ending time)
#
mc # 01 # iButton key yymmddhhmm #
yymmddhhmm
#
7. Enter one or multiple ibutton + user codes with time restriction (for multiple, repeat highlight part)
(beginning time) (ending time)
# mc # 01 # 1-9 digits user code # iButton key yymmddhhmm # yymmddhhmm #
LockState
RL4000
Quick Operation Guide

ResortLOCK LockState RL4000 Specifications

General

Brand	ResortLOCK
Model	LockState RL4000
Category	Door locks
Language	English

Summary

LockState RL4000 Operation Guide Overview

General Information

Provides details on resetting the lock and the default master code.

New Setup Procedures

Guides on initial configuration: changing master code, setting time, and auto-functions.

How to Use Codes and iButtons

Instructions for using single codes, iButtons, or combined user entries.

Master Code Management

Set New or Change Master Code (Keep Users)

Procedure to set a new master code without deleting existing user codes.

Change Master Code (Delete All Users)

Procedure to change the master code, which also deletes all user codes.

Date, Time, and User Management

Set Date and Time

Command sequence to set the lock's current date and time.

Manage User Codes (No Restriction)

Add or manage user codes without specific time restrictions.

Manage iButton Keys (No Restriction)

Add or manage iButton keys without specific time restrictions.

Manage iButton Key + User Code (No Restriction)

Add or manage combined iButton and code entries without time restrictions.

Manage User Codes with Time Restriction

Add or manage user codes with specific start and end time restrictions.

Manage iButton Keys with Time Restriction

Add or manage iButton keys with specific start and end time restrictions.

Manage iButton + User Codes with Time Restriction

Add or manage combined iButton and code entries with time restrictions.

Advanced Lock Functions

User Management by Index

Disable or enable users using their index number.

Passage Mode

Enable or disable passage mode, with options for different beep alerts.

LED Blink Control

Enable or disable the lock's LED indicator, with distinct beep signals.

Daytime Saving Time

Enable or disable the daytime saving time function.

One-Time Service Codes

Procedure to add up to ten one-time service codes.

Delete Users or Codes

Delete users by index or delete specific codes/iButtons without an index.

Auto-Unlock Function

Enable or disable the auto-unlock feature and set its specific unlock time.

Auto-Lock Function

Enable or disable the auto-lock feature and set its specific lock time.

Temporary User Lockout

Enable or disable temporary lockout for all users.

Set Schedule for Users

Configure daily access schedules for code or iButton users.