To Next PageTo Next Page
Need help?Do you have a question about the Resource Data Management PR0123-STA and is the answer not in the manual?
General| Brand | Resource Data Management |
|---|---|
| Model | PR0123-STA |
| Category | Thermostat |
| Language | English |
Describes the front panel LEDs and input keys of the thermostat, including their functions and indicators.
Details the hardware, dimensions, and connection points for the 5-relay module with RS232 communication.
Details the hardware, dimensions, and connection points for the 5-relay module with RS485 communication.
Covers parameters P-01 to P-04 related to fan modes, probe selection, and fan run-on.
Details parameters P-11 to P-44 for all four thermostat stages, including type, weighting, cut-in, and alarms.
Explains methods to access and configure the controller settings via buttons, PC, Data Manager, or network.
Guides users on navigating the controller's menu structure using the device's keys.
Lists and briefly describes various menu options like IO, Parameters, Units, Display, Network, and RTC.
Details how to view the controller's inputs and outputs via the menu system.
Explains how to select the temperature probe type, such as PT1000, NTC2K, or NTC10K, in Celsius or Fahrenheit.
Describes the assignment of relays to functions (Fans, Stages) and setting the controller ID.
Lists compatible IP communication modules (Mercury/ML) and their software version requirements.
Explains how to configure the controller for IP-R mode, where the IP address is assigned by a Data Manager.
Details how to manually set the IP address, gateway, and network mask for IP-L mode.
Describes how to configure the controller for RS485 networks, including network type and address.
Explains the 485t option for network type and how to configure Genus compatible networks.
Covers viewing network address (gAdd), relogging (rLog), clearing address (ClrA), and software version (SoFt).
Explains how the 4 relays function as heating/cooling stages and the role of fan operation.
Lists potential network alarm texts and their corresponding type index numbers.
Provides a detailed list of all inputs (probes, plant inputs) and outputs (relays, fan control) with their ranges.
Outlines electrical, environmental, and physical specifications for the controller and relay board.
Details the contact ratings (N/O, N/C) for Relay 1 (Fans) and Relays 2-5, including load types.
Lists the types of inputs supported by the controller, primarily thermistor probes.
Lists the part numbers for different configurations of the ML Stat controller.
