Response OBD-II - Product Specifications; Supported Communication Protocols

Specifications:
• Working environment temperature: -40°C ~ 85°C
•
Voltage: 9-16VDC
•
Working current: 45mA
•
Standby current: < 40mA
•
Wireless data sampling rate: 1Mbps ~ 3Mbps
• W
eight: 20g
• Dimensions: 45.2(L) x 41.3(W) x 19.5(H) mm
Communication Protocols:
This product uses ELM-327 hardware; it will only work with compatible OBD-II protocols.
Please check with your vehicle manufacturer that the OBD-II protocols and pin layout is
compatible with your vehicle.
•
SAE J1850 VPW (10.4Kbaud)
•
SAE J1850 PWM (41.6Kbaud)
•
ISO9141-2(5 baud init, 10.4K baud).
•
ISO14230-4 KWP (5 baud init, 10.4Kbaud)
•
ISO14230-4 KWP (fast init, 10.4Kbaud)
•
ISO15765-4CAN (11bit ID, 500 Kbaud)
•
ISO15765-4CAN (29bit ID, 500 Kbaud)
•
ISO15765-4CAN (11bit ID, 250 Kbaud)
• ISO15765-4CAN (29bit ID, 250 Kbaud)
• ISO15765-4/SAE J2480 (CAN BUS)
• ISO14230-4(KWP2000)