Restek Q-sep 3000 User Manual

www.restek.com • 800-356-1688 • 814-353-1300
Chromatography Products
3000
Centrifuge Operator’s / Service Manual
cat. # 26230 & 26231
The Q-sep™ 3000 centrifuge complies with all requirements of UL standard 3101–20,
Can/CSA C22.2 No. 1010.1, and Can/CSA C22.2 No. 1010.2.20.
NOTE: The programmable run-time
has been preset for
Instructions to change this are located on page 6
5 MINUTES
Centrifuge

Restek Q-sep 3000 Specifications

General

Brand	Restek
Model	Q-sep 3000
Category	Laboratory Equipment
Language	English

Summary

Model Description and Precautions

Precautions

Critical safety warnings and guidelines for safe operation, including lid locking and load balancing.

Control Panel Functions

Setup and Initial Procedures

Initial Setup Procedure

Step-by-step guide for the first-time installation, power connection, and basic operation check.

Operation and Configuration

Centrifuge Operation

Instructions for running the centrifuge, cycle completion, and sample removal.

Sample Loading and Balance

Balanced Loads

Essential rules and importance of balancing sample loads for safe and effective centrifugation.

Care and Maintenance

Preventative Service Recommendations

Rotor Management

Safety Features

Lid Safety Switch and Interlock

Details on the lid safety switch and the 0 rpm lid-locking system.

Imbalance Detection System

Emergency Rotor Chamber Entry

Troubleshooting and Parts

Troubleshooting Common Issues

Solutions for common problems like rotor not spinning, noise, or failure to run.