Restoration Hardware Callum Full-Over-Full Bunk Bed User Manual

Made in Vietnam
Distributed in the U.S.A by:
Restoration Hardware Baby & Child
11640 Harrel St. Suite B
Mira Loma, CA 91752
www.rhbabyandchild.com
Distributed in Canada by:
Restoration Hardware Canada, Inc.
1500-1055 West Georgia Street
Vancouver, British Columbia V6E4N7
WARNING: Read all
Instructions before assembling
this product.
KEEP INSTRUCTIONS FOR
FUTURE USE.
Page 1 of 10
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact us first. You can also order parts by writing to
the address above. Include the product model number, color, and a brief description of the part. Call 1-800-762-1751.
CARE AND CLEANING
TOOLS AND INSTALLATION
Tools Necessary: Key Wrench (included).
NOTE : It may be easier to assemble product with two people.
NOTE: When inserting bolts, turn clockwise until tight. Then loosen 1/2-3/4 of a turn. After crib is completely assembled,
return to each bolt and tighten.
DO NOT scratch or chip the finish. DO NOT use abrasive chemicals for cleaning. If the crib is to be stored, store in a cool
dry place and carefully pac
kage all original hardware to protect from loss.
Model No: 355 - 13
CALLUM FULL-OVER-FULL BUNK BED
All Restoration Hardware bunk bed are designed to meet the highest safety
standards and comply with all U.S. and Canadian bunk bed and cradles regulations.

Restoration Hardware Callum Full-Over-Full Bunk Bed Specifications

General

Brand	Restoration Hardware
Model	Callum Full-Over-Full Bunk Bed
Category	Indoor Furnishing
Language	English

Summary

Product Information and Support

Customer Service

Contact details for support and ordering replacement parts.

Care and Cleaning

Instructions on how to clean and maintain the bunk bed.

Tools and Installation Notes

Lists necessary tools and provides initial installation advice.

Bunk Bed Safety Guidelines

Preventing Entrapment and Falls

Critical safety guidelines to prevent entrapment or falls, including age and mattress rules.

Assembly Preparation

Parts Identification

Visual identification of all included bunk bed components.

Hardware Included

Comprehensive list of all hardware fasteners and their quantities.

Tools Needed for Assembly

Specification of tools required for the assembly process.

Assembly Steps

Step 1: Bunk Bed End Assembly

Instructions for assembling the bunk bed ends with side rails.

Step 2: Front Guard Rail Assembly

Attaching the front guard rail and brackets to the bunk bed frame.

Step 3: Slat Roll Attachment

Securing stretcher bars and the slat roll to the bed frame.

Step 4: Ladder Attachment

How to properly attach the ladder to the bunk bed structure.

Step 5: Top Platform Panel Attachment

Instructions for attaching the top platform panels to the frame.

Bedding Specifications

Mattress Dimension Specifications for Top Bunk

Required mattress sizes and thickness for the top bunk to ensure safety.