Charge the Pager
When the pager battery is low, the LED1 and blue charging LED indicator flicker
with short beep sound, then you need to charge the pager in time.
Plug the pager into the charging slot, the blue charging LED indicator will flash,
and the LED indicator will light on all the time when the it’s fully charged.
FAQ
The pager can not
receive signal from
keypad transmitter
Put on the charging
base but the LED
screen does not display
Receiving distance is
greatly shortened
The pager battery is low Charge the pager in
time
The pager has not been
paired with the keypad
Out of range
The power adapter is
failed
Pair the pager with
keypad Try it in a short
distance
Put on the charging
base but the LED
screen does not display
The power adapter is
failed
Replace the power
adapter
Problems Reasons Solutions
Replace the power
adapter
4
To Next Page