Using the ArcadeR (without modification)
Straight out of the box, the ArcadeR is designed to work with 8
and 16 bit computers that used a regular 9-pin Atari-style
joystick port.
This includes:
• Amstrad CPC machines
• Atari 8-bit machines (VCS/2600, 400, 800, XL and XE series)
• Atari 16-bit machines (ST, TT, Falcon)
• Commodore 64 and 128
• Commodore Amiga machines
• MSX
• ZX Spectrum – via Dims/Kempston interface
• ZX Spectrum Next
• FPGA computers including MiST and Mistica
• Mister FPGA computer via various DE9-USB adaptors
For some machines, only Button 1 may work. This depends on
both the machine in question (some only support a single fire
button) and the software being loaded.
Feature button 1 toggles autofire on the primary fire button.
Feature button 2 alternates the function of the secondary fire
button between Fire 2 and Fire 3 for systems that recognise
more than one fire button.
To Next Page
Loading...