RetroSound Technophonic - Welcome

2
tech@retromanufacturing.com
Thank you for purchasing a RetroSound
®
Technophonic
5-channel amplier.
General Features
• 5-channel amplifier
• Full-range Class D digital circuitry
• 65-watt RMS x 4 channels full-range @ 4 ohms
(95-watts RMS x 4 @ 2 ohms)
• 225-watts RMS x 1 channel subwoofer @ 4 ohms
(330-watts RMS @ 2 ohms)
• Selectable input mode switch for 2, 4, and 5 channel operation
• Bridgeable
• 2-ohm and 4-ohm stable
• Built-in variable low pass and high pass filters
• Bass boost (0-12db) and remote gain control
• Advanced circuitry and thermal protection
• Easily connects to your RetroSound radio
• Works with any aftermarket radio with low-level RCA outputs
• Dimensions: 12.9 in x 5.3 in x 1.87 in (33 cm x 13.4 cm x 4.75 cm)
• Fuse Rating: 60-amp
The information enclosed in this user’s manual is to be used as a guide to assist you with
installation and operation of your amplier. This guide does not cover every installation
possibility, vehicle, or aspect of the installation process.
Retro Manufacturing, LLC, RetroSound
®
, or its subsidiaries assume no responsibility for
any installation. Due to continuing improvements, features and specications are subject
to change without notice. This manual may be updated from time to time without notice.
Visit our website for the latest updates: help.retromanufacturing.com.
Welcome