17 18
From the initial 12 o’clock position (battery and carrier are unlocked), insert the key
into the key slot, press and turn it clockwise to 6 o’clock position (battery now locked
into the housing). Reverse steps to unlock.
Battery Charging
You can charge your battery while installed on the bike or removed for remote
charging. If your bike is near an AC outlet, you can charge it with your bike’s battery still
installed. The charging port is covered by a plastic cap.
Alternatively, you can remove the battery for charging. This feature is useful in small
areas where the bike will not t or AC power supply is not near the bike.
Following the steps above:
* Make sure the battery is unlocked before removal.
* Make sure the switch is o.
* Remember to keep your key secure!
WARNING! Use only the charger provided with the electric bike, otherwise damage
could occur to your battery and void the warranty. When charging, both battery and
charger should be minimum 4 in (10cm) away from the wall, and in a cool, ventilated
environment. Place nothing around the charger while in use!
WARNING! Turn o the main switch on the battery as soon as you are done riding.
This is very important for saving the battery charge. This will extend your riding range
and reduce “top-o” charging during rides.
NOTE: Battery Lock (Fig. 2)
To Next Page
Loading...
