Rev-A-Shelf RV 35 QT Series User Manual

INSTALLATION INSTRUCTIONS: 35 QT. WASTE CONTAINER PULLOUT
12400 Earl Jones Way
Louisville, KY 40299
rev-a-shelf.com
Customer Service: 800-626-1126
RV-SERIES 35 QT. WASTE CONTAINER PULLOUT
I-RVKDRB-1018
#2
TOOLS REQUIRED:
15 MIN
ESTIMATED ASSEMBLY TIME:
CARE AND MAINTENANCE:
Clean with a damp cloth and wipe
parts dry.
PARTS LIST
No. Description Qty.
A Handle 1
B Rear Basket 1
C Frame 1
D Uprights 2
E Waste Container 1
F #8 x 3/4” Truss Head Screws 4
A
C
E
F
D
B
WATCH VIDEO TUTORIALS OF
PRODUCT INSTALLATIONS
WWW.REV-A-SHELF.COM/VIDEOS

Rev-A-Shelf RV 35 QT Series Specifications

General

Product Type	Trash Can
Capacity	35 Quarts
Polymer	Yes
Lid Included	No
Color	White
Mounting Type	Undermount
Material	Polymer

Summary

Installation Instructions

Tools Required

Lists the necessary tools for assembly, primarily a Phillips head screwdriver.

Estimated Assembly Time

Provides an estimated time of 15 minutes for product assembly.

Care and Maintenance

Instructions to clean with a damp cloth and dry parts.

Step 1: Position Frame

Set the frame inside the cabinet and locate the mounting position, checking for door interference.

Step 2: Secure Frame

Insert front and rear screws to ensure the frame is square to the cabinet front.

Step 3: Install Rear Basket

Slide frame out, remove pre-installed rear screws, and install the rear basket.

Step 4: Attach Uprights

Attach both uprights into the tubes located on the frame.

Step 5: Attach Handle and Container

Attach the optional handle and insert the waste container.