Need help?Do you have a question about the REVELL KIT 1441 and is the answer not in the manual?
Details the assembly of the center carburetor with its specific notch component.
Instructions for assembling the front carburetor unit, including body and base.
Steps for assembling the rear carburetor, focusing on body and base components.
Assembly of carburetor linkage systems and vacuum diaphragms for engine control.
Connecting the fuel lines, including the center, front, and rear fuel lines with connectors.
Installation and connection of the distributor's vacuum advance mechanism.
Assembly steps for the distributor bottom and top components, including notch alignment.
Attaching the vacuum hose to the distributor assembly for proper function.
Routing and connecting spark plug wires to the engine headers and components.
Attaching spark plug wire clips and installing the rocker arm covers.
Placement of the oil filler cap onto the engine.
Installation of the dipstick and connection of the PCV hose.
Attaching the left and right exhaust manifolds to the engine.
Mounting the alternator with its front, rear, and bracket components.
Assembling the water pump, pulleys, and fan unit.
Installing the fuel pump top and bottom, and connecting fuel lines.
Attaching the air cleaner and its breather hose.
Connecting the front and rear drive belts and upper water pump hose.
Securing components using wing nuts.
To Next Page
General