Need help?Do you have a question about the REVELL Ultima Sub30 and is the answer not in the manual?
Covers risks of fire, electric shock, and improper usage.
Details the meaning of the lightning flash and exclamation point symbols.
Instructions on power cord use, grounding, voltage selection, and avoiding electrical hazards.
Guidelines for cleaning, ventilation, temperature, liquids, and explosive atmospheres.
Procedures for fuse replacement and emphasizing professional repair services.
Keeping electrical equipment away from children and considering end-use safety.
Guidance on using the manual for maximum performance and information on warranty coverage.
Attributes of the 15-inch subwoofer, voice coil, magnet system, and cone.
Specifications and function of the 15-inch auxiliary bass radiator.
Information on the 1000-watt amplifier, EQs, and crossover features.
Details about the 1-inch thick MDF cabinet and internal bracing.
Step-by-step guide for safely removing the subwoofer from its packaging.
Guidance on checking for damage and contacting the dealer if issues are found.
Steps to level the subwoofer on hard, uneven floor surfaces.
Procedure to adjust spikes for proper contact and clearance on carpeted floors.
Explanation of the 'EQ ALL' bypass function and the three parametric equalizers.
Description of the Contour (Music/Film) and Low/High Pass filter controls.
Details on audio input (XLR/RCA) and output (AUX, High Pass) connectors.
Information on power on modes (Auto/12V Trigger) and AC power connections.
Functionality of trigger inputs for power and contour mode selection.
Operation of the power switch and power on mode selection (Auto/12V Trigger).
Specifications for AC voltage selection, fuse type, and power consumption.
Options for balanced and unbalanced audio connections for optimal noise suppression.
Important steps before making connections: power off, reading manuals.
Table detailing application types, channel counts, subwoofers, crossover, and high-pass out.
Instructions for bypassing the subwoofer's internal filter and using the controller's crossover.
Steps for linking multiple subwoofers using controller crossover and power amplifier.
Guide to using the subwoofer's internal crossover with a multi-channel controller.
Connecting subwoofers to a processor using its internal crossover for low frequencies.
Setting up multiple subwoofers for stereo bass using their internal crossovers.
Wiring between a stereo preamplifier and main power amplifier via the subwoofer.
Setup for multiple subwoofers with controller and internal crossovers for optimal sound.
Connecting preamp signals to subwoofer inputs for systems without a high-pass crossover.
Understanding the impact of placement and room acoustics on low-frequency sound.
Using the built-in equalizers to compensate for room effects and standing waves.
Recommendations for high-resolution measurement systems like Revel LFO software.
Placing subwoofers in corners to maximize peaks and minimize dips.
Importance of experimenting with listener and speaker locations for optimal sound.
Placing subwoofers near solid walls and avoiding windows.
Preferred placements for two or four subwoofers in diagonally-opposite corners or wall mid-points.
Guidelines for positioning the microphone at ear height in the listening position.
Tips for choosing listening locations to avoid cancellation dips and maintain imaging.
Recommended equipment for accurate measurements, like tripods and sound level meters.
Using acoustic measurements to determine ideal crossover frequencies for smooth low-frequency response.
Recommendation to consult a Revel dealer for advanced information on crossover selection.
Guidance on cleaning the cabinet, grille, wood, and aluminum side panels.
Steps to diagnose and resolve problems like distortion, no sound, or malfunction.
A strong warning against attempting to repair the subwoofer system yourself.
First step for service is to contact your authorized Revel dealer for assistance.
Requirement to obtain return authorization from the Technical Services Department before shipping.
Guidelines for proper packaging, marking, and shipping of units for service.
Contact information for Harman Specialty Group for service inquiries and materials.
Details on low frequency extension, response, displacement, weight, and dimensions.
Specifications for output power, EQ ALL, and Contour controls.
Details on the three independent parametric equalizers and their frequency range.
Details on the variable bandwidth and level controls for the parametric equalizers.
Specifications for the low-pass and high-pass filter types, slopes, and frequencies.
Information on audio input/output connectors and trigger input functionality.
Specifications for power on mode selection and power consumption details.
A section for general notes or additional remarks.
General| Type | Active Subwoofer |
|---|---|
| Enclosure Type | Bass Reflex |
| Weight | 22 kg |
| Driver Size | 12 inches |
| Amplifier Power | 300W RMS |
| Inputs | RCA |
To Next Page
