How to fix a revital R-SR-1309 Other with no electricity?
If your Revital Other appliance has no electricity, the earth leakage circuit breaker might have switched off; switch it on. Also, check whether all power cables are properly connected to the electricity grid.
Why is there no steam coming from my Revital Other?
If there is no steam in your Revital Other, first, make sure the steam function is activated. Second, check that the temperature set inside the cubicle is higher than the ambient temperature. Third, verify that the water supply is connected and the water tap is open. Also, the filter or magnetic valve could be damaged or not connected, so clean the filter of the electromagnet and reconnect it, or replace the filter. Finally, check if the float is damaged or not connected, if so, take out the cable and plug it back in again.
General information about the steam-shower cubicle and terms of the warranty.
Essential safety guidelines for installation, operation, and general use of the steam-shower cubicle.
Details required voltage, water discharge, and water supply specifications for installation.
Lists necessary tools and components for the shower cubicle installation.
Step-by-step instructions for assembling the shower basin, panels, doors, roof, and generator.
Diagrams and instructions for connecting various water hoses to the shower cubicle components.
Explains how to use the selection tap for water flow and temperature regulation with childproof lock.
Details on controlling the blower, LED lighting, steam programme, radio, and Bluetooth music.
Solutions for problems like no electricity, no steam, or no steam from generator.
Solutions for problems like no water from shower heads, no sound, or unclear sound.
Solutions for issues related to lighting and the blower not working.
To Next Page
General