Revopoint 3D Technologies POP 3D SCANNER - Mac Handy Scan Connection; Setup Wi-Fi Hotspot for Mac; Install Handy Scan Software on Mac

MAC version Handy Scan Connection
1. Set up Wi-Fi on your router or a hotspot on your phone;
We use an iPhone as an example:
(1) Change the Wi-Fi to “Not connected”;
(2) Open “Setting” → “General”;
(3) Click “About”;
(4) Change the Name to “POP”;
(5) Open Setting →“Personal Hotspot”;
(6) WLAN Password to be: 12345678;
(7) Open “Allow others to join”;
2. After download handy Scan software at App Store, open the Handy Scan, then click
“OK”;
3.Click “System Preferences” - “Security & Privacy” - “General” - “Open
Anyway” - “Open”;
** USB cable of Mac will come online in September.