Need help?Do you have a question about the Revox B791 and is the answer not in the manual?
General| Speeds | 33 1/3, 45 RPM |
|---|---|
| Type | Belt-drive turntable |
| Drive system | Belt drive |
| Cartridge | Not included |
| Wow and flutter | 0.05% (WRMS) |
| Rumble | -70 dB |
| Cartridge weight range | 5 to 10g |
Step-by-step guide for disassembling the turntable components.
Step-by-step guide to remove the main turntable chassis.
Instructions for removing the platter drive motor unit.
Instructions for removing the tone arm support structure.
Procedure for safely replacing the main power fuse.
Procedure to check and adjust the tangential tracking accuracy.
Detailed procedure for checking tracking using alignment gauge.
Procedure for checking tracking using a marked test record.
Method for correcting tangential tracking errors.
Guide for setting the correct tracking force for the stylus.
Adjustments and functional descriptions related to the platter motor.
Procedures for adjustments, including required tools and notes.
Initial adjustments for the motor control circuit potentiometers.
Final adjustments for the motor and control system.
Description of the tone arm servo electronics and its functions.
Tests to verify the correct operation of the tone arm control system.
Procedure for adjusting the tone arm follow-up mechanism.
Procedure for adjusting tone arm follow-up using the WST-2-A alignment disk.
Procedure for adjusting tone arm follow-up using the alignment gauge.
Procedure for replacing infrared LEDs, including notes on types and installation.
To Next Page
