Revox C270 User Manual

Operation Record mode
For making a recording, the LINE INPUT CH1
and LINE INPUT CH 2 must be connected to a
signal source (amplifier, tape recorder, mixing
console) or, on models with built-in micro-
phone amplifier (Option: MIC/LINE SWITCH
BOARD 1.777.520.00), the microphones
should be connected to the MIC INPUT CH1
and MIC INPUT CH 2.
™m——— - OF eo im - OC HERE
Wi———= - OLS SCE
Wi 9 OO ee OE
@ Mount the tape.
@ Set the input selector to LINE [31], or to MIC
[29] if the recording is made via the micro-
phones.
@ Setthe output selectors of both channels, or
of the channel to be used for recording, to
INPUT [25/34].
@ The VU-meters [23/32] indicate the level of
the input signal. If the level is too low or too
high, press the UNCAL [30] to switch to unca-
librated operation (always automatically acti-
vated in MIC mode), and adjust the input level
by means of the level potentiometers INPUT
CH1 [28] and INPUT CH 2 [37].
11

Revox C270 Specifications

General

Brand	Revox
Model	C270
Category	Cassette Player
Language	English