Revox C270

Extended operation Editing function (EDIT)
EDIT [17] The EDIT [17] key activates the edit mode in
ie Min which the tape can be accurately posttioned
by manually rotating the right-hand spindle
so coro 0m [3]. The audio path is active in this mode
ym “04 mg) f which means that the recording is audible
-_s as ew = while the tape is being positioned.
SEL STEP TRANS SEARCH RESET
A a aE Se LS
= = = = ™ @ Press the EDIT [17] key. If the recorder is not
zLoc =ALOC LOOP T-DUMP EDIT in play or record mode, the edit mode is
——___ aa active and the yellow LED above this key lights
up.
PLAY STOP REC
@ Position the tape by turning the right-hand
spindle [3] by hand. The tape tension func-
tions correctly only if the right-hand spindle is
used for editing.
@ To cancel the edit mode, press the EDIT [17]
key again, or the PLAY [20], STOP [21], Z-LOC
‘eam es [13], A~LOC [14], or LOOP [15] key. The yellow
(] | me By LED above the EDIT [17] key switches off.
6
‘i. I
SEL STEP TRANS SEARCH RESET
@ in edit mode, positioning is also possible
with the aid of the spooling motors by pres-
sing the << [18] or >> [19] key. In this case the
tape is transported at reduced speed and not
lifted off the soundhead, i. e. the recording can
be heard.
To extend the life of the tape and the sound-
heads, long tape sections should not be
spooled in edit mode.
21