Do you have a question about the Rewaco RF1 and is the answer not in the manual?
Brand | Rewaco |
---|---|
Model | RF1 |
Category | Motorcycle |
Language | English |
Records vehicle identification, type, engine, and manufacturer details.
Details for the vehicle's registered owner, including contact and registration information.
Provides guidance on important information and potential dangers within the manual.
Explains the dual-circuit integral braking system and actions in case of malfunction.
Details the mechanical parking brake system and its operation.
Describes the function and positions of the ignition and light switch.
Explains the controls for starting the engine, lights, and indicators.
Identifies warning lights and actions to take when they illuminate.
Explains the coolant temperature gauge and operating ranges.
Explains the oil temperature gauge and normal operating ranges.
Describes the fuel gauge operation and when to refuel.
Details the voltage indicator and acceptable operating voltage range.
Guidelines for the initial 1,000 km to ensure proper engine and part interaction.
Specifies the running-in period required for new vehicle brakes.
Lists pre-trip checks for operational safety and driving readiness.
Instructions for starting the engine, including cold starts and safety precautions.
Procedures for parking the vehicle safely, especially on inclines.
Explains the gear shifting process and clutch operation.
Details the servobrake system and its dependency on the running engine.
Advises on safe braking techniques in various conditions.
Describes the option to adjust pedals for driver comfort and safety.
Instructions for securing luggage and respecting load limits.
Specifics on the Topcase luggage storage for FX4/FX5/FX6 models.
Details on the integrated boot and glove compartment for RF1 models.
Identifies components within the service box, including tank cap and dipstick.
Locates the dipstick within the RF1 LT engine compartment.
Information on the glove box and optional Saftybag for storing small items.
General advice on adjusting speed, handling aquaplaning, and using engine braking.
Guidance on purchasing and using approved accessories and parts.
Recommendations for carrying safety equipment like a triangle and first-aid kit.
Procedures for checking and topping up engine and gear oil.
Steps to check the coolant level in the RF1 model's equalizing tank.
Explains the importance of checking brake fluid and potential moisture absorption.
Guidance on checking the battery and handling battery acid.
Factors influencing brake pad wear and the need for expert workshop maintenance.
Importance of correct tyre pressure for safety and wear.
Recommendations for cleaning and preserving plastic and aluminium components.
Advice on regular washing, preserving paintwork, and avoiding damage.
Information on scheduled maintenance intervals and authorized service.
Troubleshooting guide for electrical system issues, focusing on fuse replacement.
Steps to take if the vehicle experiences a loss of engine power.
Actions to take if a reduction in braking power is detected.
Table detailing recommended tyre pressures for front and rear tires.
Specifies recommended engine and gear oils for various models.
Details the specification for coolant used in RF1 models.
Specifies the required type of brake and clutch fluid.
Information on the type of lead-free petrol suitable for the vehicles.
Guidelines for maximum load capacity for different parts of the vehicle.
Technical specifications and load limits for the FX4 model.
Technical specifications and load limits for the FX5 model.
Technical specifications and load limits for the FX6 model.
Technical specifications and load limits for the RF1 model.