18
Maintenance and Care
!
!
Wear of brake pads
The wear of brake pads is largely dependent on the
conditions of use and the driving style. The maintenance
of the braking system must be carried out in an expert work-
shop in accordance with the prescribed inspection
and maintenance intervals.
Tyre pressure and wear
Too high or too low tyre pressure not only impedes driving
safety of the trike but also has an effect on their wear. The
tyre pressure should therefore be checked twice a month
of before and after a longer trip. (see pg. 20)
Cleaning plastic and aluminium parts
If normal washing is insufficient, plastic and imitation
leather may only be treated with special plastic cleaners.
Aluminium parts should be cleaned regularly and
preserved.
Cleaning and caring for the bodywork
Frequent washing will keep up the value of your vehicle.
Treat the bodywork and paint with preserver and polish
from time to time.
There will be no guarantee accepted when applying and
removing stickers, decorative strips and similar materials.
Inspection intervals
The maintenance inspection intervals are described in the annex.
The necessary work and controls may only be carried out by
rewaco partner dealerships. The execution of this work is certified
in this service book.
Warranty claims may only be made directly with the
manufacturer/importer or a rewaco partner dealership.
If defects are to be rectified within the scope of the legal
warranty guidelines by an expert workshop which is not
authorised by the manufacturer or importer, a written
approval from the manufacturer or importer must be
available to carry out the work.
To Next Page
Loading...
