GB
AUTO+ 300X&300M
™
SHREDDERS 9
bin or loading door open safety function
As a safety precaution, if the bin or loading door is opened during shredding, the shredder will stop
and the bin full indicator will illuminate (
).
jam free technology in manual feed slot
Sensors in the paper feed area measure the thickness of paper about to be shredded. The ability to
shred or not is communicated through red and green lighting. Green means that the stack of paper
is within the shredders sheet capacity and OK to shred. Red means that you have too much paper,
remove some sheets in order to shred.
Given that you are unable to shred more sheets of paper than the shredder is capable of
shredding, paper jams are prevented.
This prevents time wasted through reversing paper and unblocking jams not to mention the mess it
can create.
intelligent help
1 In the unlikely event of the shredder jamming, the Auto+ 300X and 300M will stop shredding,
and the jam icon will blink in orange.
2 The shredder will illuminate the FWD (
) and REV (
) buttons in the sequence necessary
to clear the jam.
3 If the jam cannot be intelligentally cleared, the jam icon (
) will illuminate in red. At this point
open the auto feed chamber to clear any jammed material.
automatic jam clearance
Intelligent Jam Clearance: In the unlikely event of the shredder jamming, the Auto+ 300X and 300M
will automatically reverse and forward the engine three times to clear a jam. During this operation
the Paper Jam indicator will ash (
).
To Next Page
Loading...
