What to do if my Rexton Hearing Aid does not work?
If your Rexton Hearing Aid isn't working, here are a few things you can try: * Ensure the hearing instrument is turned on. * Gently close the battery compartment completely. * Replace the battery with a new one. * Make sure the battery is inserted correctly. * If the power-on delay is active, wait 12 seconds and check again.
Why is my Rexton RX12 Hearing Aid sound weak?
If the sound from your Rexton Hearing Aid is weak, try the following: Replace the empty battery, increase the volume, clean the instrument, or close the battery door completely (or press and hold the program button for about 2 seconds).
Why is my Rexton RX12 Hearing Aid emitting whistling sounds?
If your Rexton Hearing Aid is emitting whistling sounds, try reinserting the instrument until it fits securely or clean the instrument.
What to do if my Rexton RX12 sound is distorted?
If the sound from your Rexton Hearing Aid is distorted, you can try replacing the empty battery, lowering the volume, or cleaning the instrument.
Why is my Rexton RX12 emitting signal tones?
If your Rexton Hearing Aid is emitting signal tones, gently close the battery compartment completely or replace the empty battery.
General| Feedback Cancellation | Yes |
|---|---|
| Directional Microphones | Yes |
| Telecoil | Yes |
| Bluetooth Connectivity | Yes |
| IP Rating | IP68 |
| Style | Receiver-in-Canal (RIC) |
| Connectivity | Yes |
To Next Page
