Need help?Do you have a question about the RF magnum 1 and is the answer not in the manual?
Operating Environment| temperature range | -30 to +50 degree C |
|---|---|
| frequency tolerance | 0.005% |
| frequency stability | 0.001% |
Power| power requirement | 12 - 13.8 V DC, negative ground |
|---|---|
| current consumption | 9 amps maximum |
| power output SSB | 50 Watts |
Transmitter Specifications| power output FM / CW | 20 Watts |
|---|---|
| power output AM | 1-10 Watts Average / 50 Watts PEP |
| fm deviation | +/- 2 kHz maximum |
Receiver Specifications| sensitivity SSB | 0.25 µV at 10 dB S + N/N |
|---|---|
| sensitivity AM | 1.0 µV at 10 dB S + N/N |
| sensitivity FM | 0.3 µV at 12 dB SINAD |
Weight and Dimensions| weight | 4.4 lbs |
|---|---|
| dimensions | 7.75 x 2.25 x 10.75 in |
Details licensing requirements for transmitting on 12 and 10 meter bands.
Guidance on selecting a location and attaching the MAGNUM 1 mounting bracket.
Explains DC power connection and provides a voltage warning for installation.
Information on connecting antennas, cable types, and recommended antenna types.
Guides on measuring VSWR, tuning antennas, and acceptable limits.
Controls RF Power, Frequency, Band selection, and Operating Mode.
Instructions on how to enter and navigate the radio's menu system.
Details external speaker/PA jack, CW key, DC power, and ANT jacks.
Covers frequency range, power, dimensions, and environmental details.
Details power output, tuning steps, emissions, and audio response.
Outlines circuit type, sensitivity, selectivity, and audio output.
To Next Page