heated. And start over temperature warning, display the fault
code: "ERR2".
When the temperature is cooled to the normal range or the power
failure is rectified after the restart, the fault warning can be
cleared.
Because the heating element is a lossy part, the service life of the
heating element is related to air humidity, working temperature,
environmental climate, power size, internal material structure and
manufacturing process.
If the heating element is damaged, please replace the heating
element of the same model. General requirements: Power match-
ing, appearance size to one, wire diameter is the same, the
sensor line KP+ and KP- one by one corresponding. Of course,
there are differences in heating elements from different manu-
facturers. It is recommended to replace the original heating
element!
The sensor line of this equipment is k-type thermocouple,
please distinguish the "polarity" when replacing. Otherwise, it
will cause an irconstant temperature.
VII.Specification
VIII. Core replacement
220VAC（110VAC）
1000W
100℃--480℃. （212F-896F）
LCD5%-100% 50L/Min
Power Airflow Display
Hot Air gun
temperature range
±2℃
High speed
turbofan
15000 r/Min 90cm 2.1KG
The fan type
Handle line
length
The fan speed
Machin weight
Airflow resolution
true
Constant temperature precisionVoltage
To Next Page
Loading...