This equipment has multiple fault protection, display prompt,
sound warning function. The following is a brief description of
the failures and keys:
ERR1: Indicates that the heater is damaged or the polarity of the
sensor cable is incorrect. Disconnect the power supply to rectify
the fault.
ERR2: The heater is in high temperature or the handle is off.
Disconnect the power supply to rectify the fault.
SLEEP: indicates that the device is in standby SLEEP state.
OFF: Closes.
ON: Open.
▲ : The set value increases.
▼ : The set value decreases.
Sound prompt function: different sound prompt function will
appear when power on, constant temperature and equipment
error. Please rectify the fault before it can be cleared.
Warning:
this equipment is a tool for high-temperature operation,
please pay attention to avoid scalding when using.
When operating, someone should be on duty.
Do not use near inflammable and explosive objects.
Thank you for using it!
IX. Warningo instructions
To Next Page
Loading...