Address：S601 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian P.R.C
Tel：4008 592 315 Fax：+86 592 5788216
Email: support@rgblink.com http://www.rgblink.com
1.2.6 Then connect mini+, PTZ camera, and PC to the router through network
cables to form a local area network. The topology is as follows:
2. Set the corresponding communication ports to the same on the PTZ camera
and mini+ device, especially the UDP port, as shown in the following figure:
2.1 Set the corresponding communication port on the PTZ camera, such as
UDP port 1259.
To Next Page
Loading...