EasyManuals Logo

RGBlink Mini+ Installation Precautions

RGBlink Mini+
9 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
Address：S601 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian P.R.C
Tel：4008 592 315 Fax：+86 592 5788216
Email: support@rgblink.com http://www.rgblink.com
7
3.1 Press the S button 4 times until the Fx light is on, and the following interface
should be displayed on the mini+.
3.2 Turn the right rotary knob(Y rotary knob) until IP SETTING is selected.
3.3 Set the IP of the camera you want to control to the corresponding IP
address. For example, set the IP address of camera 1 to 192.168.1.88.

Other manuals for RGBlink Mini+

Preview: User Manual
User Manual54 pages

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the RGBlink Mini+ and is the answer not in the manual?

RGBlink Mini+ Specifications

General IconGeneral
ControlUSB
SwitchingSeamless
Downstream KeyNot supported
Audio MixerNot supported
MultiviewNot supported
HDR SupportNot supported
HDCP SupportYes