RGF REME HALO - User Manual

REME HALO™ by RGF®
A Guardian Air Purication System
New Advanced Environmental Air Treatment System
Thank you for purchasing the REME HALO
TM
by
RGF® Environmental Group, Inc.
We are condent this system will provide you with years of
Fresh, Clean and Odor-Free Air!!!
NOTE: Please take time to read the attached assembly instructions.
All instructions and precautions should be adhered to while
operating this system.
RGF® Environmental Group, Inc.
Copyright 2014

Summary

Installation Instructions - Location

Determine Mounting Location

Guidance on selecting the optimal position for the Guardian Air REME HALO™ unit in the air duct.

Safety Warnings

Critical warnings, including eye protection from UV light and handling damaged power cords.

Installation Instructions - Mounting Unit

Prepare Ductwork

Instructions for cutting a 3-inch hole into the HVAC ductwork for unit installation.

Attach Mounting Plate

Securing the mounting plate to the air duct using the self-adhesive sealing ring.

Installation Instructions - Sealing

Secure Unit and Seal

Inserting the unit probe and ensuring a proper seal with the flange and sealing ring.

Apply Sealing Ring

Electrical Connection

Wiring Guidance

Connecting the unit to a 24 VAC power source, including voltage color codes.

Power Supply Requirements

Ensuring the 24 VAC power supply can provide at least 700mA for each unit installed.

Output Adjustment

Adjustable Shroud

CFM Range Settings

Replacing REME HALO Cell

Safety First: Disconnect Power

Critical safety step: completely disconnect power before changing the PHI cell.

Remove Housing and Cell

Instructions on how to detach the unit housing and then release the cell from the housing.

Cell Replacement Procedure

Disconnect Lamp Connector

Detaching the lamp connector from the cell pins with a gentle rocking motion.

Install New Cell

Replacing the old REME HALO™ Cell with a new one and reassembling the unit.

Limited Warranty Policy

Warranty Duration and Coverage

Details the five-year warranty for the ballast and two-year for the cell, excluding specific damages.

Obtaining Warranty Service

Warranty Common Questions

Warranty Period and Contact

Non-Covered Parts and Conditions

Malfunction Troubleshooting Steps

RGF REME HALO Specifications

General

Installation	Duct-mounted
Voltage	24 VAC
Application	Residential/Commercial
Power Supply	24V AC/DC
Reduces	Odors, mold, bacteria, viruses, and VOCs
Mounting	Duct-mounted
Technology	Reflective Electromagnetic Energy (REME)