RGL KP1000 - Technical Specification; POWER SUPPLY; RELAY 1 For electric locks; RELAY 2

Introduction 3 KP1000, KPX1000 & KPX2000 are vandal resistant Access Control
Keypad units for internal & external applications (only with extra
Technical specifications 3 rainshield fitted). The unit accepts up to 500 users and provides entry via
the use of pin codes or proximity cards (KPX1000 & KPX2000 only).
How to change Default codes THE KPX2000 HAS THE FACILITY TO WIRE IN AN EXTERNAL PROXIMITY CARD
REMOTE READER.
How to change Lock relay (1) - Time delay 4
If codes are lost or forgotten 5
POWER SUPPLY 12VDC regulated with battery backup
If Engineer code is lost or corrupted 5 IT IS ADVISABLE To USE A POWER SUPPLY AT 1.5
TIMES THE CURRENT LOAD OF SYSTEM
Wiring diagram - Standard Break glass 6
Wirin dia ram - RGL Break lass unit 7 RELAY 1 NO/COM/NC 3Amp@25OVAC/3OVDC
g g g For electric locks It is advised that electric locks are wired into this relay
Wiring diagram - Fail-safe/Fail-secure Strike 8
RELAY 2 Same as Relay 1
Wiring diagram - Sounder and Touch free switch 9
STANDBY CURRENT Standby: 4OmA Not including attached devices
Wiring diagram - Double keypad 10 Max: l3OmA Not including attached devices
Enrolling 4 digit User code/Pin number 11 EXIT SWITCH NORMALLY OPEN (NIO) CONTACTS
(Closed when pressed)
How to delete a User code/ Pin number 11
BELL OUTPUT AN EXTERNAL BELLIBUZZER CAN BE FIUED THAT
How to change AUX code 12 REQUIRES 12VDC@lOOmA max TO OPERATE
How to change AUX relay (2) - Time delay 12 Built-in Proximity
reader 65mm
Keypad backlight functions 13 A1126—bitEMcards
How to enrol Proximity card — EM type 14 COMPATIBLE CARDS
How to delete a card 14 Environmental -30 to 63°C (Non condensing)
characteristics Suitable for External use— 1P55
Operating instructions 15
Mechanical 120 Lx 76W x 27 H (mm)
dimensions 410g (0.9 Ibs)
Issue 3.6- 14/08/22 2 Issue 3.6- 14/08/22 3