TECHNICAL DATA
Type of tool CN80 Industrial Coil Nailer
Dimensions
14-1/4”X5-3/16”X12-1/8”
362mmX132mmX307mm
Weight (without fasteners) 3.98kgs (8.78lbs.)
Actuation mode Contact actuation
Magazine capacity 225-300 nails
Maximum allowable pressure 120psi (8.3bar)
Recommended pressure range 70psi to 100psi (5bar to 7bar)
Fasteners
Only the nail sizes shown in the table below can be driven with this nailer.
15°Wire welded coil nails
Applications
• Making pallets, drums and export wooden boxes;
• Crating;
• Making wooden fence;
• General construction applications.
To Next Page
Loading...