Need help?Do you have a question about the Rheavendors Group XX micro and is the answer not in the manual?
High-level safety guidelines and warnings for machine operation.
Alert regarding potential danger from accidental contact with high voltage.
Caution about potential contact with hot parts of the machine.
Warning about potential contact with moving components during operation.
Instructions and cautions for using the service key, reserved for operators.
Guidelines for children's use and supervision, including safety measures.
Procedure to follow in case of water leaks or smoke, emphasizing safety.
Warnings against modifying the machine or its safety devices.
Definition of residual risks that persist despite precautions.
Behaviors and actions intended to minimize residual risks.
Requirement for trained personnel to perform technical actions.
Guidelines for correct power supply, including voltage limits and earthing.
Alert that the machine may contain hot pressurised water.
Warning against detaching active hydraulic and electric supplies.
Specifies the twelve-month guarantee period for components.
Details on free replacement or repair of manufacturing defects.
Procedure for machine replacement in case of irreparable failures.
Conditions and actions that void the machine's guarantee.
States that improper use of the machine invalidates the guarantee.
Disclaimer of responsibility for damages resulting from various causes.
Machine compliance with EU directives and safety standards.
Specifications for water pressure, flow, and electrical supply.
List and description of safety mechanisms and components.
Limits for water and energy supply, temperature, and humidity.
Guidelines for the power supply cable and the importance of grounding.
Description of the machine's software, divided into master and configuration.
Instructions for using external terminals to program the machine.
Introduction to the rheAction system for machine programming.
Details on operating MT1 and MT2-A terminals for programming.
Guidelines for safely transporting, handling, and positioning the machine.
Details on water quality, softening, pressure, and connection requirements.
Guidelines for electrical connection, grounding, and safety devices.
Details on filling the boiler and tank, and water shortage indicators.
Explanation of LEDs indicating the water heating process.
How to activate the machine's washing cycle using the keyboard.
Procedure for performing a complete daily wash cycle.
Specific key combinations to activate mixing bowl wash cycles.
Guidelines for preparing and using sanitising solutions.
Instructions for sanitising, drying, and reassembling machine parts.
Programming machine parameters to create recipes for dispensing.
Steps required to enter the machine's programming mode.
Cautionary advice for operating the machine in programming mode.
Adjusting boiler pump speed and product motor rotation time/speed.
Setting pump power time, water quantity, and regulating water flow.
Adjusting mixer motor rotation time and speed.
Assigning time credit to product motors and programming dispensing time.
Information on programmable parameters and example tables for drink dispensing.
Tables showing example parameters for various drink selections.
Lists minimum and maximum values for programmable variables.
Lists error messages with actions, comments, and causes for troubleshooting.
Matrix showing LED status for different error conditions.
Emphasizes cleaning for maintaining performance and preventing failures.
Actions to prevent bacterial growth in contact with foodstuffs.
Instructions for cleaning parts using lukewarm water or sanitising solutions.
Warnings against water jets and advice on hand washing and potable water.
Procedure for decommissioning and disposing of the machine components.
General| Brand | Rheavendors Group |
|---|---|
| Model | XX micro |
| Category | Coffee Maker |
| Language | English |
To Next Page
