Rheem EcoNet CC2 User Manual

EcoNet CC2 Translator
Installation Instructions
Instrucciones de instalación
del repetidor CC2 de EcoNet
Installations d’instructions
du translateur CC2 d’EcoNet
Part | Pieza núm. | N° de pièce RETRN620CC2

Rheem EcoNet CC2 Specifications

General

Brand	Rheem
Model	EcoNet CC2
Category	Electronic dictionary
Language	English

Summary

Safety Considerations

Introduction to CC2 Translator

CC2 Translator Overview

Describes the CC2 translator as an interface device for HVAC systems and its kit components.

Critical Installation Warning

Model Compatibility

Models Requiring CC2 Translator Only

Lists HVAC models compatible with the CC2 Translator without an RJ14 data cable.

Models Requiring CC2 Translator and RJ14 Cable

Lists HVAC models compatible with the CC2 Translator and the RJ14 data cable.

Installation Procedures

Install CC2 Translator (No Cable)

Step-by-step guide for installing the CC2 Translator on models that do not require a data cable.

Install CC2 Translator with RJ14 Data Cable

Step-by-step guide for installing the CC2 Translator on models requiring an RJ14 data cable.

System Start-Up

Verify CC2 Translator Recognition

Follow start-up process and check EcoNet Control Center screen to confirm the CC2 translator is recognized.

CC2 Translator LED Indicators

Troubleshooting Common Issues

Red LED Not Lit

Troubleshooting steps for when the red LED on the CC2 Translator is not illuminated.

Green LED (Middle) Not Lit

Troubleshooting steps for when the middle green LED on the CC2 Translator is not illuminated.

Green LED (Bottom) Not Lit

Troubleshooting steps for when the bottom green LED on the CC2 Translator is not illuminated.