To Next PageTo Next PageWhat to do if my Rheem R801TA125524MSA has a 1 hour lockout?
If your Rheem Blower experiences a 1-hour lockout, shut off the main power to the unit, wait 30 seconds, and then restore power to reset it.
What to do if line and neutral are reversed on Rheem R801TA125524MSA Blower?
If the line and neutral are reversed on your Rheem Blower, ensure L1 and Neutral are not swapped on the IFC and junction box.
How to resolve a twinning fault in Rheem R801TA125524MSA?
To resolve a twinning fault in your Rheem Blower, for twinned units, check that both IFCs are set for "TWIN" and wires are connected between "TWIN" terminals.
General| Configuration | Upflow/Horizontal |
|---|---|
| Input BTU | 125, 000 |
| AFUE | 80% |
| Model Number | R801TA125524MSA |
| Fuel Type | Natural Gas |
| Efficiency | 80% AFUE |
| Blower Motor Type | PSC |
| Blower Speed | Multi-Speed |
| Weight | 160 lbs |
| Ignition Type | Direct Spark Ignition |
Hazards of duct leaks drawing pollutants like fumes and odors into living spaces.
Requirements for maintaining safe clearances around the furnace for operation and service.
Warnings about installing furnaces on combustible floors, especially carpeting.
Table detailing required clearances to combustible materials for different furnace models.
Essential information on ensuring sufficient fresh air for proper combustion.
Specific air requirements when the furnace is installed in a confined area like a closet.
Detailed tables specifying required free area for combustion air openings in confined spaces.
Specific requirements for vertical venting using Type "B-1" vent pipe.
Detailed instructions for installing the gas piping, including valves, unions, and drip legs.
Requirements for supply and manifold gas pressures for proper furnace operation.
Step-by-step instructions for measuring and setting supply and manifold gas pressures.
