Do you have a question about the Rheem RA1618AJ1NA and is the answer not in the manual?
Refrigerant Type | R-410A |
---|---|
Voltage | 208/230 V |
Phase | 1 |
Compressor Type | Scroll |
SEER | 16 |
Tonnage | 1.5 |
Power Supply | 208/230V, 60Hz |
Sound Pressure Level (Outdoor) | 76 dB |
Highlights sound reduction, durability, efficiency, and ease of access for installation and service.
Focuses on the visually appealing and robust cabinet construction with louvered panels.
Details optional accessories like crankcase heaters, low ambient kits, and hard start kits.
Explains the coding system for identifying specific RA16 air conditioner models.
Details unit dimensions, weights, refrigerant charge, and coil specifications.
Covers line voltage, overcurrent protection, and circuit ampacity requirements.
Lists available accessories and compatible Rheem thermostats for the RA16 series.
Presents octave band sound power levels (dBA) for various unit sizes.
Provides detailed measurements for operating and shipping configurations.
Illustrates required clearances for service and unit placement.
Shows typical control wiring for gas/oil and electric heat systems.
Covers installation best practices and refrigerant line sizing recommendations.
Lists cooling performance metrics like SEER, EER, and capacity for unit/coil combinations.
Performance data when RA16 units are paired with Rheem air handler units.
Performance data for RA16 units matched with RHWB hydronic air handlers.
Outlines system components, quality assurance standards, and construction.
Details cabinet construction, fan, compressor, and refrigeration components.
Covers operating characteristics, SEER, and electrical specifications.
Explains the warranty policy for product parts and replacement.