Rheem RGFE - ADJUSTING SETUP ITEMS; SELECT THE SETUP ITEM TO BE ADJUSTED; SELECT THE DESIRED VALUE

131
FIGURE 114
SELECT THE SETUP ITEM TO BE ADJUSTED (MAX HEAT ADJ%).
5. Use the up and
down arrow keys to
view and navigate to
the desired setup
menu item. Once
the desired menu
item is highlighted,
press the “
M
” key to
enter the sub menu.
In this example, we
will change the
MAX
HEAT Adj%
(cur-
rently set to 0%)
FIGURE 115
SELECT THE DESIRED VALUE (7).
6. Use the up and
down arrow keys to
view and navigate
to the desired setup
selection. Once the
desired menu item
is highlighted, press
the “
M
” key to
change the selec-
tion. In this exam-
ple, we will change
the
MAX HEAT
Adj%
(currently set
to 0%) to +
7
%
FIGURE 116
UPDATING THE SUBSYSTEM.
7. This screen;
Updating the
Subsystem
will be
displayed briefly
while the system
updates the setting.
Home
Enter
Home
Enter