RHEONIK RHE 07 User Manual

RHEONIK Messgeräte GmbH REV. I, Apr. 2004
.
Operation Manual RHE 07, 08, 11 Page 27
- CutLimit:
The low flow indication cut-off is indicated in percentage of the half nominal flow rate. Depending on
software version, slight and insignificant deviations of this flow rate may be given. The CutLimit is
valid for digital flow rate display, totalization and current outputs if preseted for Flow.
Tim e
Mass Flow
Mass Flow
Tim e
Low Flow Cutoff (Cut Lim it)
actual Flow
indicated Flow
- DensCutoff:
Density cut-off for flow rate indication and totalization. For applications where the liquid is removed by
gas stream out of the pipeline but the meter should not count the gas stream.

RHEONIK RHE 07 Specifications

General

Brand	RHEONIK
Model	RHE 07
Category	Measuring Instruments
Language	English