Under-Counter Beverage Cooler
Edition: A (March 2012) - 5 -
·WARNING: Do not damage the refrigeration circuit.
·WARNING: Do not use electrical appliances inside the storage compartment
of this appliance.
1.2 Assembly
·Remove the appliance from the packaging and peel off any protective film
from all surfaces.
·Fit the shelf support clips onto the shelf support strips, making sure that the
clips for each shelf are of the same height and that they are securely engaged
on the support strip.
·Unwrap each shelf carefully, to prevent damaging their protective coating or
surface finish.
·Position the shelves onto the clips.
·Please note the following maximum shelf loading weights：20Kg.
To Next Page
Loading...
Need help?
General
