To Next PageTo Next PageWhat to do if my RHINO GSP2H-865 appliance is not working?
If your RHINO Accessories appliance isn't working, there are several potential causes. First, ensure the unit is correctly plugged in. Check the power supply. If the plug or lead is damaged, or if there's an internal wiring fault, contact a RHINO agent or a qualified technician for assistance.
Why is my RHINO Accessories appliance temperature too high or low?
If your RHINO Accessories appliance's temperature is too high or too low, several factors could be responsible. Check if the filter or condenser is blocked with dust and clean them if necessary. Make sure the doors are properly shut and the seals aren't damaged. Ensure the appliance isn't overloaded; reduce the amount stored inside if needed. Also, the appliance might be near a heat source, or airflow to the fans might be blocked, so move the appliance to a more suitable location and remove any obstructions. High ambient temperature may also be the cause, so increase ventilation or move the appliance to a cooler position. If factory default parameters were adjusted, contact a RHINO agent or qualified technician.
How to fix a loud RHINO Accessories appliance?
If your RHINO Accessories appliance is unusually loud, it might be touching a neighboring object or not installed on a level and stable surface. Check the installation position and adjust if necessary to ensure it's stable and not in contact with other objects.
General| Brand | RHINO |
|---|---|
| Model | GSP2H-865 |
| Category | Accessories |
| Language | English |
General safety precautions, intended use, supervision, electrical safety, cord damage, disconnecting power, explosive substances, defrosting.
Removing packaging, fitting shelf clips, unwrapping shelves, positioning shelves, shelf loading weights, packaging disposal.
Placement, power flex exit, ambient temperature, sunlight/damp areas, door opening space, level surface, ventilation requirements.
Instructions for switching on, Standard and Saving modes, and switching between them.
Detailed steps to adjust the ST parameter for temperature control in Standard Mode.
General cleaning instructions, sanitising solution, avoiding abrasive agents, and wiping dry.
How to clean the filter, its importance, and removal/refitting process for single door models.
Importance of cleaning the condenser, warnings about damage, and cleaning procedures.
Table for diagnosing and resolving common faults like appliance not working, temperature issues, or noise.
