Caution: Please read through the instructions carefully. Installer is responsible
for damage if instructions are not followed properly. Look behind each drill or
cut location BEFORE YOU DRILL OR CUT. Installer is responsible for damage
(i.e. drilling/cutting into a wiring harness, battery, fuel tank etc.). Extra installers
will be helpful in some parts of the installation. Refer to vehicle’s maintenance
manual for torqueing specifications on reused hardware.
SEAT-921
Club Car DS
RHOX 900 Series Seat Box Kit
Installation Instructions
Contents of SEAT-921 Seat Box Kit:
a (2 ea.) Front Seat Back Support Brackets
b (2 ea.) Vertical Support Brackets
c (1 ea.) Horizontal Support Bracket, Passenger Side
d (1 ea.) Horizontal Support Bracket, Driver Side
e (1 ea.) Utility Box
f (2 ea.) Rear Seat Back Brackets
g (1 ea.) Footplate
h (2 ea.) Handrails
i (2 ea.) Handrail Extensions
j (2 ea.) Footplate Support Brackets
k (1 ea.) Box of Hardware (Contents on Next Page)
To Next Page
General