• Connect the metal hose Q to its tting C .
• Connect the metal straight lance R.
• Before vacuuming the ash, check that it is cold and
no longer alight.
• Do not vacuum burning embers
• Do not empty the drum into a container which is
easily inammable and make sure that the ashes
are completely cool.
• If the metal hose becomes hot during use, turn the
device off immediately and let it cool.
• Turn the appliance on using the (I)ON switch, loca-
ted on the cover of the motor.
• Vacuum the ash directly from the replace or
from the stove (wood or pellet-burning). Hold the
suction nozze about 1 cm. above the ash.
BLOWER FUNCTION
• Insert the suction pipe into the upper hole on the
bin and tighten securely. In this way, the blowing
function of the product can be used.
USAGE
WET & DRY VACUUM CLEANER
• Be sure that switch is in off position OFF and con-
nect the machine to a suitable socket.
• The machine must be always kept on horizontal
bases, in a safe and stable way.
• Insert the suitable lters for the proper use.
• Never use the appliance without lters .
• IMPORTANT: Clean the lter from time to time in
order to ensure that the vacuum cleaner continues
to perform optimally (and environment).
• Use the most suitable accessories for the requsted
usage.
• Put switch on ON position in order to start the
machine.
• When job is over, switch off OFF and keep away
the plug from the socket.
FILTER CLEANING
• The machine shall be disconnected from its power-
source, by removing the plug from the socketout-
let, during cleaning or maintenance
• 1- Remove the lter (N/O/P)
• 2- Shake the lter (N/O/P)
• 3- wash tge lter (N/O/P)
• Let the lter drying very well ,befor reassemble it
• Once the lter has been cleaned, check whether it
is suitable for further use. If it has been damaged
or broken, replace it with an original lter.
CARE AND MAINTENANCE
The unit is maintenance-free.
• The machine shall be disconnected from its power
source, by removing the plug from the socket-out-
let, during cleaning or maintenance
• Clean the exterior part of the machine with a dry
cloth.
• Move the appliance only by catching the carrying
handle located on the motor head.
• Store the appliance and the accessories in a dry
safe place, out of the reach of children.
WARRANTY CONDITIONS
All our machines are subjected to strict tests and are
covered against manufacturing defects in accordance
with applicable regulations. The warranty is effective
from the date of purchase.
The following are not included in the warranty:
parts subject to normal wear, rubber parts, charcoal,
lters and the accessories and optional accessories.
Accidental damage, caused by transport, neglect or
inadequate treatment, incorrect or improper use and
installation failing.
The warranty shall not cover any cleaning operations
to which the operative components may be subjected,
such as clogged nozzles and lter blocked due to
limestones. This cleaner is intended to be
used for domestic and hobby work: the warranty
does not cover any other different kind of use.
N O P
To Next Page
Loading...