Ribind UP - Articulated Arm Length Modification

43
min. 600
290 100
55
~ 90°
30 (*85)
38
Pierce the leaf and fasten the articulated arm respecting the measures indicated in the pictures.
(*) If needed, use the extension bush ACG9485 to increase the gap between the automation and the arm to 85 mm.
M5
M5
To modify the length of the articulated arm:
1- Unscrew the 4 M5 screws
2- Extend/redce the arm (+/-)
3- Tighten the 4 M5 screws
Articulated arm
G
B